Cloud-electronics DCM1 Manual de usuario descargar pdf (Pagina 16)

DCM1 & DCM1e Installation and User Guide v1.016

commands to third-party equipment in response to

Ethernet commands generated elsewhere (future

rmware release).

14.

ETHERNET INTERFACE: standard

RJ45 network connector allowing the DCM1e to be

controlled and congured from an Internet browser.

In a future rmware release, it will also accept control

commands using RS-232 syntax, and be used as an

Ethernet-to-serial bridge to pass TCP/IP commands from

third-party control systems to the RS-232 connector

15. Music Mute input: 2-pin 5 mm-pitch screw terminal

connector for interfacing the DCM1 to a re alarm or

other emergency system. The input is congurable for

use with either Normally Open (N/O) or Normally

Closed (N/C) contacts; shorting (or removing a short)

will mute music in all zones (see “Congure Music Mute”

on page 45). One input source may be protected from

this mute if wished, permitting the input to be used for

automatic or manual evacuation messages (see “Select

Emergency Source” on page 44).

16. POWER: Locking 4-pin power mini-DIN type for

connection of the DCM1’s external DC PSU.

* Ethernet-to-serial bridge functionality will be available in a future rmware

release. Please check www.cloud.co.uk for additional product features.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 78 79

Sin comentarios

Cloud-electronics DCM1 Manual de usuario Pagina 16