Cloud-electronics VTX-WM1 Manual de usuario descargar pdf (Pagina 4)

VTX-WM1 Installation Guide v1.24

Introduction

Thank you for purchasing this Cloud product.

The VTX-WM1 Web Monitor Card is an

option for Cloud VTX Series power ampliers.

Once correctly tted and congured, it

will allow the performance and settings of

the amplier in which it is installed to be

monitored at a remote location using standard

Internet browsers on any PC, Mac, PDA or

smartphone, without the necessity for either

dedicated software or hardware.

Topics in this manual include:

• how to install the VTX-WM1 in a VTX

amplier

• how to make the necessary internal

connections and internal jumper changes

• how to perform the initial card

conguration via an Internet browser

• how to customise the card to suit the

installation

• how to use the GUI

NOTE: a short video giving an overview

of the installation of the VTX-WM1 is available

on the Cloud website www.cloud.co.uk . If

tting a VTX-WM1 for the rst time, you may

nd it helpful to view this before commencing

the installation.

Applicability

The VTX-WM1 card may be tted to the

following amplier models:

• Cloud VTX4120 4-channel amplier –

4 x 120 W

• Cloud VTX4240 4-channel amplier –

4 x 240 W

• Cloud VTX4400 4-channel amplier –

4 x 400 W

Note that the VTX-WM1 is not suitable for

older VTX models, such as the VTX 750, VTX

1200 or VTX 1500.

What’s in the box

Check that the box contains all of the following,

and notify your Cloud dealer immediately in the

case of any absences or evidence of damage:

• VTX-WM1 PCB card

• Rear plate (with RJ45 connector slot)

• 2 x self-tapping screws

• Quick Installation Guide

1 2 3 4 5 6 7 8 9 ... 20 21

Comentarios a estos manuales

Sin comentarios