Cloud-electronics RL-1MB Manual de usuario descargar pdf (Pagina 13)

RL Series and RSL Series Installation Guide v2.0

Wiring details

In most cases, remote control plates connect to their host devices via

per-channel, 3-pin 5 mm-pitch screw terminal connectors on the device’s

rear panel. The only exception is the CX163, which has a 4-pin connector.

The connector will be labelled REMOTE LEVEL, REMOTE LEVEL/

SOURCE, REMOTE MUSIC CONTROL, or something similar,

depending on the device.

On all types of remote control plate, connection at the plate is via a rear 3-pin

screw-terminal connector.

RL Series plates: Connection may be via single- or twin-core screened

cable. RL Series plates can generally be connected to devices that support

remote music source selection with single-core cable, but two-core screened

cable is required when connecting to devices that do not support this.

RSL Series plates: These always require twin-core screened cable.

The use of crimp ferrule-type terminals is recommended for the cable

terminations as this will provide a much more reliable long-term connection.

Recommended maximum cable length is 100 m (328 ft.)

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Sin comentarios

Cloud-electronics RL-1MB Manual de usuario Pagina 13